Part Numbers for Jule Hoefer Standard Size Snap-A-GelsTM

Since there is a wide selection of gels, please follow the 7 steps below to create a catalog number for the Gels you need.

 Call us at 1-800-648-1772 for assistance.

Here is a sample part number:  12D15HLC10G

Step 1. Select Acrylamide Concentration:  We will pour almost any single concentration or gradient concentration gel.  

 12 = 12% single concentration  (Specify any single concentration). Single concentration gels are provided with a 4% stacking gel layered on top of the resolving gel, except for gels with catalog designation C1G or C2G
 420 = 4%-20% gradient (Pick any gradient you need).  Not sure what percent acrylamide gel to choose?
Step 2.

Select the Gel Type:  (more about buffer systems)
 D = Tris-Glycine Gels with SDS, (Gel buffer is: 0.375M Tris-HCl, pH 8.8, .1% SDS)
 W = Tris-Glycine Gels without SDS (Gel buffer is: 0.375M Tris-HCl, pH 8.8)
 N = Tris-Borate-EDTA (TBE), (Gel Buffer is: 0.090M Tris, 0.080M Boric Acid, pH 8.3, 0.0026M EDTA). TBE Gels

        do not come with a 4% stacking gel.
 U = Urea/TBE Gels ( Same as N Gels, with 7 molar Urea added). TBE/Urea Gels do not come with a 4% stacking gel.

 T = Tris-Tricine Gels (ideal for low molecular weight 2 - 60 kilo-Daltons), (Gel Buffer is: 1.0M Tris-HCl, pH 8.45, 0.1% SDS).

 A = Tris Acetate Gels. New! Ideal for large size proteins up to 500 kD.

 B = Blue Native Gels. New! Ideal for study of protein-protein interactions and very hydrophobic proteins, such as membrane proteins, their complexes and super complexes. (as described by Schagger and von Jagow, Analytical Biochemistry (1991) 199, 223-231)
Step 3. Select Gel Thickness:
             15 = 1.50 mm thick
           10 = 1.00 mm thick
             75 = 0.75 mm thick
Step 4.

Select your Running Apparatus:                          
      HL = Fit into GE Healthcare (Manufactured by Hoefer, Inc.) SE400, SE600, Ruby SE600, SE650, SE660, SE650, SE660, SE700
     
Step 5.

Select the Number of Sample Wells:
                        
      C10 = 10 sample wells
      C15 = 15 sample wells
      

        C1 = 1 well. The top of gel is flat and a sample well for standards is not included. The resolving gel is poured 1cm from the top to create a flat top for prep and 2D work.  The C1 designation does not include a stacking gel. The Gels are made with 2 cm wide spacers, which create an 14 cm wide gel for 13 or 14 cm IPG strips.
      C2 = Same as C1 except there is also a sample well (for loading a protein standard) at one end.  The price for a sample well is $2.00 per gel for gels in glass cassettes.  The C2 designation does not include a stacking gel. The Gels are made with 2 cm wide spacers, which create an 14 cm wide gel for 13 cm IPG strip 1 cm is used for the sample well.

      C0 = no sample wells.  Gels are poured 3.5 cm from top.  Gels are typically poured using 2 cm wide spacers, thus providing 16 cm wide gels.
Step 6.

Select Glass Cassette for your gels:
      G = Glass Cassette

      GLF=low fluorescence glass.

Step 7.   Copy your entries from steps 1-6 (in that order). This is your part number. For special requests include a note with your order.

Does Your Part Number Look Similar To This Sample? 420D15BLC10G
Standard and Large size gels are sold 6 per box or 2 per box. You can order any quantity or 2 or more gels.
Order gels by phone, fax, or e-mail or Order Online.

4 STEPS TO SELECT GELS

1) Choose Gel Concentration

 

3) Gel Prices

4) Place an Order

 

 Order GelsContacts UsMini GelsHoefer Std Size GelsBioRad Std Size GelsLarge Gels, EttanPricesGradient FormersHome

HOME

JULE, INC.
185 Research Drive, #6
Milford, CT  06460
U. S. A.     1-800-648-1772   Service@precastgels.com , Order On Line! 
1-203-878-7411 International and Local Calling Area
Fax: 1-203-878-744 8 

Copyright © 1999 [Jule, Inc.] All rights reserved.
Revised: January 11, 2012