New! Jule Snap-A-Gels ^(TM) for the Ettan Dalt and BioRad Protean Plus Dodeca Cell Systems.

Save time and money!  Get Results

The 3-color image represents three different human kidney samples, which were loaded onto a single 10-20% gradient Jule Precast Gel.  Each sample was labeled with a different fluorescent dye, then combined and loaded onto the same gel where the spot patterns overlapped perfectly.  The gray images are the images for the three dyes from the same gel.  Tip of the day: Both high and low molecular weight proteins are better resolved when the Ettan Dalt six and Ettan Dalt twelve buffer tank temperature is set at 25 degrees C (not 15 degrees C).

See more gel photos: Click here!

Specifications:

                - Low fluorescence glass plates.

                    - 1.0 mm gel thickness.

                    - Front Plate is 21.2 cm tall x 27.6 cm wide and the  Back Plate is 21.7 cm tall x 27.6 wide.

                    - Gel is 25.5 cm wide.

                    - Ultra flat top for 2D electrophoresis, poured 1.0 cm from top of front plate.

                    - 38:1 Acrylamide:Bis ratio

                    - Fits into the Ettan Dalt and BioRad Protean Plus Dodeca Cell Systems.

                    - Two month shelf life.

Options available:

                  -  Single or Gradient acrylamide concentrations (you specify).

                   - Bind Silane can be applied to one of the glass plates. Gel adheres to the glass plate which contains Bind Silane.  Ideal for spot picking. There is a $4.00 charge per Gel for Bind Silane. Jule, Inc. has greatly improved the adherence of Bind Silane.

                    -  Repel Silane can be applied to opposite plate upon request (no extra charge).

                    - Fluorescent markers attached to one plate (2 markers). See fluorescent markers (circular dots) that were applied the glass plate/Gel (below) at the left and right edges, near the spacers. There is no extra charge for the 2 fluorescent markers. The Markers help to establish reference points for spot picking.

                    - 19:1 Acrylamide:Bis Ratio (38:1 is standard).

                   -  Sold in packs of 2 or 6 gels. You may purchase any quantity needed.

WHY NOT TRY SOME TODAY?

PRICES:    # Gels    Non-Gradient    Gradient       With Bind Silane

                2 gels        $45 each        $49 each        Add $4.00 per gel

                6+ gels       $42 each        $45 each       Add $4.00 per gel

CONTACT JULE, INC. for more information and to receive a catalog number for the gels that have the options you need.  

New!  Click here for information on standard size (smaller) cassettes sizes made with low fluorescence glass! These will fit the Hoefer SE400, SE600, BioRad Protean II and IIxi for example!

               Mini 8cm x 10cm

Gel Selection Guide (see pictures of Snap-A-Gels)
2-D Gel Electrophoresis
Gel Catalog Numbers
Gel Prices

Running and Sample Buffer (See new low prices for 2007)

Protein Standards

Pre-Stained Protein Standards

Order Online