Large Size Jule Snap-Gels for the Bio-Rad Apparatuses

Jule Large Gels fit and run in the BioRad Protein Series Units

                             BioRad Protean II, IIxi and XL and Protean Plus

   Order Gels   Mini Gels   Large Gels-Hoefer   Gels for Ettan Dalt   Empty Cassettes   Prices   Gradient Formers   Contact Us   Home

Large Size Gels with 10, 15, 20 or 30 Sample Wells.

Gels with a flat top for 2D electrophoresis.

Choose standard or low fluorescence glass!

*Must have appropriate gaskets and clamps for the Bio Rad Apparatus. Learn more....Click here!

Jule Large Size Gels for the BioRad equipment with sample wellsJule Large Gels with 20 or 30 sample wells Jule Large Gels with flat top for 2D electrophoresis

Jule Mini Gel vs. a Jule Large Size Gel.

What does your sample require?

Get Results and Save Time.

Jule Large Gels are ideal for comples sample with many bands Sample 2D Gel run on Jule Large Gel

 Available in 16 cm and 20 cm length gels.

Available in 16 cm and 20 length gels.

For Large Gels with 10 to 30 Sample wells.
Large Gel Thickness, .75 mm Total Volume per Well, L
10 Sample Wells 110
15 Sample Wells 80

20 Sample Wells

25

30 Sample Wells

18

Large Gel Thickness, 1.00 mm Total Volume per Well, L
10 Sample Wells 145
15 Sample Wells 110
20 Sample Wells 33
30 Sample Wells 24
Large Gel Thickness, 1.50 mm Total Volume per Well, L
10 Sample Wells 220
15 Sample Wells 165
20 Sample Wells 50
30 Sample Wells 37

 

 

Large Size Cassette ("BL" designation in the Part Number) front glass plate is 16 cm tall x 20 cm wide, back glass plate is 18.3 cm tall x 20 cm wide.  

The Taller Cassette ("BXL" designation in the Part Number) front glass plate is 20 cm tall x 20 cm wide, back glass plate is 22.3 cm tall x 20 cm wide. (Gels are available with sample wells or with a flat top for 2D (IPG strip) electrophoresis) 

Gaskets and clamps for 2D electrophoresis read below:

*Requires XL gasket and clamps from BioRad (entire conversion kit not required).  Jule Gels with flat top for 2D work can be supplied with 1cm or 2 cm wide spacers to create a 16 cm or 18 cm gap for IPG ( 15 or 17 cm if a sample well is requested for running a lane of protein markers). If 1 cm wide spacers are needed, the Protean II, and IIxi apparatus require the XL Gasket and Clamps in order to seal the upper buffer properly. 

BioRad xi and XL Gaskets Click for more info.

Top is xi gasket followed by XL gasket below it.

4 STEPS TO SELECT GELS!

1) Choose Gel Concentration

2) Build Gel Part Number

3) Gel Prices

4) Place an Order